1. Available operations- Read Info (cable: Samsung 730SC USB);
- Write Firmware (cable: Samsung 730SC USB);
- Read NVM (cable: Samsung 730SC USB);
- Write NVM (cable: Samsung 730SC USB);
- Repair NVM (cable: Samsung 730SC USB);
- Direct Unlock (cable: Samsung 730SC USB).
Back to main menu
2. Cables for connection
Samsung 730SC USB cable | Back to main menu
Samsung 730SC UART cable | Back to main menu
3. Necessary driversFor correct work with the phone install "SAMSUNG SoftBank Drivers" driver.
Back to main menu
4. Write Firmware- Put phone into Download Mode.
- Connect the phone to PC via Samsung 730SC USB cable.
- Install required driver.
- Select firmware file.
- Click "Write firmware" button.
- Follow software instructions (prompts).
Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Back to main menu
5. Direct Unlock- Put phone into Download Mode.
- Connect the phone to PC via Samsung 730SC USB cable.
- Install required driver.
- Select 940SC_FW_SCJF2_unlocked.oct firmware file.
- Click "Write firmware" button.
- Follow software instructions (prompts).
- After firmware write process phone will be unlocked.
Back to main menu
6. Download ModeTo enter emergency mode, reconnect the battery, press and hold "Volume down" + "Camera" + "Power ON" buttons Back to main menu
DEVAMI>> |
Hiç yorum yok:
Yorum Gönder
Üye Olmadan Kolayca Soru Sorun veya Yorum Yapın