Octoplus box Samsung GT-B5310U Help

Cables: Samsung Micro UART, Micro USB

Samsung GT-B5310U (Corby PRO)

1. Available operations
2. Cables for connection
3. Necessary drivers
4. Write Firmware
5. Read unlock codes
6. Download Mode
7. FAQ

1. Available operations

  1. Read Info (cable: Micro USB);
  2. Write Firmware (cable: Micro USB);
  3. Read codes (cable: Samsung Micro UART).
Back to main menu

2. Cables for connection



Micro USB cable
Back to main menu


Samsung Micro UART cable
Back to main menu

3. Necessary drivers

For correct work with the phone install "SAMSUNG USB Driver for Mobile Phones" driver.

Back to main menu

4. Write Firmware

  1. Put phone into Download Mode.
  2. Connect the phone to PC via Micro USB cable.
  3. Install required driver.
  4. Select firmware file.
  5. Click "Write firmware" button.
  6. Follow software instructions (prompts).
Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Back to main menu

5. Read unlock codes

  1. Connect powered-on phone to PC via Samsung Micro UART cable.
  2. Install required driver.
  3. Click "Read codes" button.
  4. Follow software instructions (prompts).
Back to main menu

6. Download Mode

To enter Download Mode, reconnect the battery, press and hold "Volume down" + "Camera" + "Power ON" buttons
Back to main menu

7. FAQ

Q: How can I enter Unlock Codes without sim card?

A: Type and Enter unlock codes:
  1. NCK: #7465625*638*XXXXXXXX#.
  2. NSCK: #7465625*782*XXXXXXXX#.
  3. SPCK: #7465625*77*XXXXXXXX#.
  4. CPCK: #7465625*27*XXXXXXXX#.
  5. Multi: #7465625*685*XXXXXXXX#.
  6. SIM: #7465625*746*XXXXXXXX#.
    Where XXXXXXXX - proper code read by software.

Back to main menu

DEVAMI>>

Hiç yorum yok:

Yorum Gönder

Üye Olmadan Kolayca Soru Sorun veya Yorum Yapın

imei repair