1. Available operations- Read Info (cable: Micro USB);
- Write Firmware (cable: Micro USB);
- Direct Unlock (cable: Micro USB);
- Read codes (cable: Micro USB);
- Repair IMEI (cable: Micro USB);
- Reset Screen Lock (cable: Micro USB);
- Root (cable: Micro USB).
Back to main menu
2. Cables for connection
Micro USB cable | Back to main menu
3. Necessary driversFor correct work with the phone install "SAMSUNG USB Driver for Mobile Phones" driver.
Back to main menu
4. Write Firmware- Put phone into Download Mode.
- Connect the phone to PC via Micro USB cable.
- Install required driver.
- Select firmware file.
- Click "Write firmware" button.
- Follow software instructions (prompts).
Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Back to main menu
5. Direct Unlock- Connect powered-on phone to PC via Micro USB cable.
- Install necessary driver.
- Click "Unlock" button.
- Follow software instructions (prompts).
Back to main menu
6. Read unlock codes- Connect powered-on phone to PC via Micro USB cable.
- Install required driver.
- Click "Read codes" button.
- Follow software instructions (prompts).
Back to main menu
7. Repair IMEI- Connect powered-on phone to PC via Micro USB cable.
- Install required driver.
- Enter correct IMEI.
- Click "IMEI fix" button.
- Follow software instructions (prompts).
Back to main menu
8. Reset Screen Lock- Root your phone manually.
- Connect powered-on phone to PC via Micro USB cable.
- Install necessary driver.
- Click "Reset Screen Lock" button.
- Follow software instructions (prompts).
Back to main menu
9. Root- Copy the file "Root Galaxy Y.zip" to the root folder of your memory card.
- Shutdown your device.
- Put your device into Recovery mode.
- Select "apply update from sdcard" and choose "Root Galaxy Y.zip".
- Select "reboot system now".
- After reboot phone will be rooted.
Back to main menu
10. Download ModeTo enter emergency mode, reconnect the battery, press and hold "Volume down" + "Home" + "Power" buttons. Back to main menu
11. Recovery modeTo enter recovery mode, reconnect the battery, press and hold "Volume UP" + "Home" + "Power ON" buttons Back to main menu
12. FAQQ: My phone not found by program. How can I configure my phone?
A: Provide following steps:
- Disconnect USB cable from phone (if connected).
- Go to Menu->Settings->Applications->Development.
- Turn on "USB Debugging" option.
- When message is appear press "Yes".
- Press "Read Info" in Octopus Samsung software.
Back to main menu
DEVAMI>> |
Hiç yorum yok:
Yorum Gönder
Üye Olmadan Kolayca Soru Sorun veya Yorum Yapın