1. Available operations- Read Info;
- Write Firmware;
- Direct Unlock;
- Repair IMEI;
- Reset Screen Lock;
- Root;
- Repair EFS.
Back to main menu
2. Necessary driversFor correct work with the phone install "SAMSUNG USB Driver for Mobile Phones" driver.
Back to main menu
3. Write Firmware- Put phone into Download Mode.
- Connect the phone to PC via cable.
- Install required driver.
- Select firmware file.
- Click "Write firmware" button.
- Follow software instructions (prompts).
Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Back to main menu
4. Direct Unlock- Root your phone manually.
- Connect powered-on phone to PC via cable.
- Install necessary driver.
- Click "Unlock" button.
- Follow software instructions (prompts).
Back to main menu
5. Repair IMEIStandard Repair IMEI method:- Root your phone manually.
- Connect powered-on phone to PC via cable.
- Enter correct IMEI.
- Click "IMEI fix" button.
- Follow software instructions (prompts).
Back to main menu
6. Reset Screen Lock- Connect powered-on phone to PC via cable.
- Install necessary driver.
- Click "Reset Screen Lock" button.
- Follow software instructions (prompts).
Note: After the operation will be successfully completed, You need to draw any pattern, if Pattern Lock was set, or enter any password, if Password Lock was set. Back to main menu
7. Root- Connect the phone to PC via cable.
- Copy the file "Root_GT-P7300.zip" to the root folder of your memory card.
- Copy the file "Superuser-3.2-GT-P7300.zip" to the root folder of your memory card.
- Shutdown your device.
- Put your device into Recovery mode.
- Select "apply update from sdcard" and choose "Root_GT-P7300.zip".
- Select "apply update from sdcard" and choose "Root_GT-P7300.zip".
- Select "reboot system now".
- After reboot phone will be rooted.
Back to main menu
8. Repair EFS- Put phone into Download Mode
- Connect the phone to PC via cable.
- Install required driver.
- Click "Repair EFS" button.
- Follow software instructions (prompts).
Back to main menu
9. Download ModeTo enter Download Mode, perform next steps:
- Press and hold "Volume DOWN" + "Power ON" buttons.
- Press "Volume UP" button to go Download Mode.
- Press "Volume UP" button to confirm.
Back to main menu
10. Recovery modeTo enter Recovery Mode, perform next steps:
- Press and hold "Volume DOWN" + "Power ON" buttons.
- Press "Volume DOWN" button to select Recovery icon.
- Press "Power" button to go Recovery Mode.
Back to main menu
11. FAQQ: My phone not found by program. How can I configure my phone?
A: Provide following steps:
- Disconnect USB cable from phone (if connected).
- Go to Menu->Settings->Applications->Development.
- Turn on "USB Debugging" option.
- When message is appear press "Yes".
- Press "Read Info" in Octopus Samsung software.
Back to main menu
DEVAMI>> |
Hiç yorum yok:
Yorum Gönder
Üye Olmadan Kolayca Soru Sorun veya Yorum Yapın