1. Available operations- Read Info (cable: E210+USB);
- Write Firmware (cable: E210+USB);
- Direct Unlock (cable: E210+USB);
- Read codes (cable: E210+USB).
Back to main menu
2. Cables for connection
E210+USB cable |
Back to main menu
3. Necessary driversFor correct work with the phone install "SAMSUNG USB Driver for Mobile Phones" driver.
Back to main menu
4. Write Firmware- Put phone into Download Mode.
- Connect the phone to PC via E210+USB cable.
- Install required driver.
- Select firmware file.
- Click "Write firmware" button.
- Follow software instructions (prompts).
Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Back to main menu
5. Direct Unlock- Connect powered-on phone to PC via E210+USB cable.
- Install necessary driver.
- Click "Unlock" button.
- Follow software instructions (prompts).
Back to main menu
6. Read unlock codes- Connect powered-on phone to PC via E210+USB cable.
- Install required driver.
- Click "Read codes" button.
- Follow software instructions (prompts).
Back to main menu
7. Download ModeTo enter emergency mode, reconnect the battery, press and hold "Volume down" + "Power ON" buttons.
Back to main menu
8. FAQQ: How can I enter Unlock Codes without sim card?
A: Type and Enter unlock codes:
- NCK: #7465625*638*XXXXXXXX#.
- NSCK: #7465625*782*XXXXXXXX#.
- SPCK: #7465625*77*XXXXXXXX#.
- CPCK: #7465625*27*XXXXXXXX#.
- Multi: #7465625*685*XXXXXXXX#.
- SIM: #7465625*746*XXXXXXXX#.
Where XXXXXXXX - proper code read by software.
Back to main menu
DEVAMI>> |
Hiç yorum yok:
Yorum Gönder
Üye Olmadan Kolayca Soru Sorun veya Yorum Yapın